Problems and Solutions
This chapter discusses problems you may encounter while
operating your printer, and their likely solutions. If you are having
difficulty achieving the desired printing result, first locate the
problem in the table below and refer to the appropriate page for
the solution.
Power supply
l
Power is not being supplied.
Printing
l The printer does not print.
l The print is faint or uneven.
l Dots are missing in the printed characters or
graphics.
l Printed characters are not what you expected.
l The print position is not what you expected.
Paper handling
l
Single sheets do not feed properly.
l
Continuous paper does not feed properly.
l
Switching between continuous paper and single
sheets cannot be performed properly.
Options
l Using the cut sheet feeder, paper does not
feed properly.
l Using the pull tractor with the push tractor,
continuous paper does not feed properly.
l Using the roll paper holder, paper does not
feed properly.
l Using an optional interface, the printer does not
operate properly.
Refer to
7-3
Refer to 7-4
Refer to
7-5
Refer to
7-6
Refer to
7-6
Refer to
7-9
Refer to
7-14
Refer to
7-16
Refer to
7-20
Refer to
7-22
Refer to
7-26
Refer to
7-29
Refer to
7-31
7-2
Troubleshooting
