Epson LX-810 Manual

A SERVICE OF

next previous

Graphics

In the illustration on the previous page, you can see the main rules

for graphics design:

l In single-density, no dots can be placed on vertical lines.

.

In high-speed double-density, dots can be placed on vertical

lines, but no dots can overlap.

.

In double-density, dots can be placed on vertical lines, and

they can overlap.

After choosing the desired density, you design your figure by

plotting dots on graph paper.

The high-speed double-density design shown below illustrates the

correct way to plot a figure. It should point you in the right

direction for your own work.

Software and Graphics

4-17