BIOS Settings for NB32-SL Motherboard
EA SPORTS™ PGA TOUR
®
Golf Challenge Edition Upgrade Kit
Page 14 of 14 040-0068-01 Rev B 1/12/2006
5. Now use the Arrow keys to highlight Advanced BIOS Features, and press Enter. A screen
similar to the following will appear:
6. Use the Arrow keys to highlight
the setting for First Boot Device.
Use the Page Up and Page Down
keys to change the setting to
CDROM.
7. Set Second Boot Device to HDD-
0 and Third Boot Device to
Disabled the same way.
Press ESC to go back to the Main
Menu.
Note: If a floppy drive is
installed, set First Boot Device to
Floppy, Second Boot Device to
CDROM, and Third Boot
Device to HDD-0.
8. Now use the Arrow keys to highlight Integrated Peripherals, and press Enter. The
Integrated Peripherals menu will appear. (Note that this menu is too long to display on
screen all at once.)
9. Press and hold the down Arrow
(↓) key to scroll down to the
bottom of the menu, and then use
the up arrow (↑) to highlight the
setting for PWR Lost Resume
State (fourth item from the
bottom).
Use the Page Up and Page Down
keys to change the setting to Turn
On.
10. Now that all settings are correct, press F10. The following prompt will appear:
11. Make sure "Y" shows at the end of the prompt (if "N" shows, the settings will not be saved),
and
ress Enter to save the settin
s and exit.
CDROM
HDD-0
Disabled
Turn On
Save to CMOS and EXIT (Y/N) Y
