Administration: Discovery
Configuring CDP
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 115
8
-
Status
—If the LLDP MED extended power via MDI packets were sent, or
if they were overloaded.
• 802.3 TLVs
-
Size (Bytes)
—Total LLDP MED 802.3 TLVs packets byte size.
-
Status
—If the LLDP MED 802.3 TLVs packets were sent, or if they were
overloaded.
• LLDP Optional TLVs
-
Size (Bytes)
—Total LLDP MED optional TLVs packets byte size.
-
Status
—If the LLDP MED optional TLVs packets were sent, or if they were
overloaded.
• LLDP MED Inventory
-
Size (Bytes)
—Total LLDP MED inventory TLVs packets byte size.
-
Status
—If the LLDP MED inventory packets were sent, or if they were
overloaded.
• Tota l (By te s)—Total number of bytes of LLDP information in each packet
• Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
Configuring CDP
This section describes how to configure CDP.
It covers the following topics:
• Setting CDP Properties
• Editing CDP Interface Settings
• Displaying CDP Local Information
• Displaying CDP Neighbors Information
• Viewing CDP Statistics
