A-2
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
• IUA—IUA Parameters
• logger—Log Server
• M3UA—M3UA Parameters
• measM—Measurement Manager
• mmdb—Main Memory Data Base Process
• MML—MML
• mmSAgt—Measurement Manager SNMP Agent
• OPERSAGT—Operational SNMP Agent
• pom—Provisioning Object Manager
• procM—Process Manager
• product—Network Element
• PROVSAGT—Provisioning SNMP Agent
• RadiusAccounting—Radius Accounting Parameters
• replicator—Replicator
• SIP—SIP
• SUA—SUA Parameters
• TCAP—TCAP Capabilities
If no match is found for a facility-specific parameter, the file is searched for a match on the default
facility.
Special Parameters
• callver—Call verification utility
• diskmonitor—Disk monitor shell script
• XE—Execution environment
Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Parameter Definitions
The XECfgParm.dat file configuration parameters for the Cisco PGW 2200 Softswitch software release
9.x are presented alphabetically in Table A-1.
Caution This list of parameters is provided as a reference. Do not edit any parameters unless they are listed in
the following table or unless you have been instructed to do so by Cisco technical support; otherwise,
your system might not work as intended.
