A SERVICE OF

logo

2-11
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
Chapter 2 Switch Installation
Connecting to a Console Port
USB Mini-Type B Console Port
Step 1 If you are connecting the switch USB-mini console port to a Windows-based PC for the first time, install
a USB driver. See Figure 2-5 and the following sections for more information:
“Installing the Cisco Microsoft Windows XP USB Driver” section on page C-5
“Installing the Cisco Microsoft Windows 2000 USB Driver” section on page C-6
“Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver” section on page C-6
Step 2 To remove the cover from the USB mini-type B console port, use a Philips screwdriver to loosen the
captive screw on the USB mini-type B console port cover. See Figure 2-4. Remove the screw and take
off the cover.
Figure 2-4 Removing the USB Mini-Type B Console Port Cover
16TC
±12/24/48
0.5-3.0A
332703