CHAPTER
2-1
Cisco IE 2000 Switch Hardware Installation Guide
OL-25818-04
2
Switch Installation
This chapter describes how to install your switch, verify the boot fast, and connect the switch to other
devices. It also includes information specifically for installations in hazardous environments.
Read these topics, and perform the procedures in this order:
• Preparing for Installation, page 2-1
• Installing or Removing the Flash Memory Card (Optional), page 2-7
• Connecting to a Console Port, page 2-9
• Connecting to Power, page 2-13
• Installing the Switch, page 2-31
• Connecting Alarm Circuits, page 2-34
• Connecting Destination Ports, page 2-39
• Verifying Switch Operation, page 2-47
• Where to Go Next, page 2-47
Preparing for Installation
This section provides information about these topics:
• Warnings, page 2-1
• Additional Information for Installation in a Hazardous Environment, page 2-3
• Installation Guidelines, page 2-5
• Verifying Package Contents, page 2-7
Warnings
These warnings are translated into several languages in the Regulatory Compliance and Safety
Information for this switch.
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals.
Statement 43
