DMS100 PG with CompuCALL Link 13
Configure the ServiceVersion parameter in the DMS-100 PG session
configuration to receive a correct stream of CompuCALL messages. The
DMS-100 PG uses the configured parameter to pass on to the
ServiceVersion field in the DV-Application-Log-On message, which will
be sent during the application logged on session. The ServiceVersion value
uniquely identifies the stream of messages which are corresponding to the
appropriate CompuCALL software release.
For example, the ServiceVersion value for the stream of Switch Computer
Application Interface (SCAI) of the CompuCALL release 08.01 is:
SCAI10.
1.1.1. CCM Matrix Support
Since the DMS-100 PG supports up to CCM10, use the following CCM
F
1
F
(Common CM) Matrix tables to find out which PLC and PCL the DMS-
100 PG supports.
Table 1: CCM Matrix_1
Table 2: CCM Matrix_2
1
A CCM is one of several types of Development Release Unit (DRU).
