OTHER RECORDING FUNCTIONS
81
• Pressing [̇] or [̈] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image will reappear a short while later.
• If you do not adjust the focus of the enlarged image,
it will return automatically to step 3. If this happens
and you still want to adjust the focus, press [SET] to
display the enlarged image again.
6.
Press the shutter button to record the image.
To do this:
Focus in on the subject
Focus out on the subject
Do this:
Press [̇].
Press [̈].
Manual focus position
4.
Press [SET].
5.
While watching the
image on the monitor
screen, use [̇] and
[̈] to focus.
NOTE
• Whenever you perform an optical zoom operation
(page 58) while recording with manual focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: MF ȚȚcm - ∞
* ȚȚ will be replaced by the actual focusing range value.
