OTHER SETTINGS
169
Changing the Display Language
You can use the procedure below to select a display text
language.
• The number and types of languages depend on the
geographic area where the camera was marketed.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Language”,
and then press [̈].
3.
Use [̆], [̄], [̇], and [̈] to change the
setting, and then press [SET].
Do this:
Press [̆] or [̄].
Press [̇] or [̈].
Press [BS].
To do this:
Change the value at the cursor location
Move the cursor between settings
Toggle between 12-hour and 24-hour
timekeeping
5.
When all the settings are the way you want,
press [SET] to apply them.
• After editing the time and date, display the image to
confirm that the date and time are correct.
IMPORTANT!
• You cannot change the date of the following types of
files.
— Movies, Voice recordings
— Images created with MOTION PRINT
• The date and time stamped into an image using the
Time Stamp feature cannot be edited (page 124).
• You cannot edit the date and time of a image that is
protected. Unprotect the image and then edit the
date and time.
• You can specify any date in the range of January 1,
1980 to December 31, 2049.
