2. SPECIFICATIONS
RH-9800
2
2. SPECIFICATIONS
2-1. Specifications
Lower thread trimmer
Upper thread
trimmer
Long type Short type
-00 - -
-01 -
-02 - *
Specification -00 -01 -02
Application Men's clothes and ladies' clothes Jeans and work clothes
Sewing speed 1,000 - 2,000 rpm (100 rpm steps)
Button hole length 10 – 50 mm 10 – 38 mm
L1 14 – 18 mm L5 28 – 32 mm
L2 18 – 22 mm L6 32 – 36 mm
L3 22 – 26 mm L7 36 – 40 mm
L4 26 – 30 mm
Stitch pitch 0.5 - 2.0 mm (0.1 mm steps)
Stitch width 1.5 - 3.2 mm
Tacking length 3 – 43 mm (1 mm steps) or none
Cloth presser height 12 mm 16 mm
Stitch shape
changing
Selected by a program
Cut timing selection Selected by a switch
Starting method Dual switch (cloth presser switch and start switch) or single switch
Feed method
Intermittent feed by three pulse motors (X, Y, θ)
Needle DO x 558 Nm 80 – Nm 120 (Schmetz)
Safety equipment
Built-in emergency stop function and automatic stopping device which stops the machine when
the safety circuit is activated
Air pressure
Main regulator: 0.5 MPa
Knife pressure regulator: 0.3 MPa
Air consumption 43.2 l/min. (8 cycles/min.)
Noise level 81 dB at max. speed of 2,000 rpm, measured according to ISO 10821
Dimensions 1,200 mm (W) x 590 mm (D) x 1,120 mm (H)
Work table legs T-shaped height-adjustable type
Power supply
Single-phase 110, 200, 220, 230, 240 V
3-phase 220, 380, 415 V
Maximum electric power consumption: 1 kVA
Weight 175 kg
Eyelet buttonhole Straight buttonhole
Sewing shape
Eyelet buttonhole
Eyelet buttonhole with
taper
Straight buttonhole
Straight buttonhole
with taper
* -02 is further divided into L1 - L7 specifications in accordance with the stitch
length. Please be sure to specify the stitch length when ordering.
DH4-B980-
RH-9800-
0793Q
0794Q 0795Q
0796Q
