RH-9800
iii
CAUTION
Sewing
This sewing machine should only be used by
operators who have received the necessary
training in safe use beforehand.
The sewin
machine should not be used for an
applications other than sewing.
Be sure to wear
rotective
o
les when usin
the
machine.
If
o
les are not worn, there is the dan
er that if a
needle breaks,
arts of the broken needle ma
enter your eyes and injury may result.
Turn off the power switch at the following times,
otherwise the machine ma
o
erate if the start
switch is
ressed b
mistake, which could result in
injury.
When threading the needle
When replacing the needle
When not usin
the machine and when leavin
the machine unattended
If usin
a work table which has casters, the casters
should be secured in such a wa
so that the
cannot move.
ttach all safet
devices before usin
the sewin
machine. If the machine is used without these
devices attached, injury may result.
Do not touch an
of the movin
arts or
ress an
ob
ects a
ainst the machine while sewin
, as this
ma
result in
ersonal in
ur
or dama
e to the
machine.
If an error occurs in machine o
eration, or if abnormal
noises or smells are noticed, immediatel
turn off the
ower switch. Then contact
our nearest Brother
dealer or a qualified technician.
If the machine develo
s a
roblem, contact
our
nearest Brother dealer or a qualified technician.
Cleaning
Turn off the
ower switch before carr
in
out
cleaning, otherwise the machine may operate if
the start switch is
ressed b
mistake, which could
result in injury.
Be sure to wear
rotective
o
les and
loves
when handlin
the lubricatin
oil and
rease, so
that the
do not
et into
our e
es or onto
our
skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the
rease
under an
circumstances, as the
can cause
vomiting and diarrhoea.
Keep the oil out of the reach of children.
Maintenance and inspection
Maintenance and inspection of the sewing
machine should only be carried out by a qualified
technician.
Ask your Brother dealer or a qualified electrician to
carry out any maintenance and inspection of the
electrical system.
Turn off the power switch and disconnect the
power cord from the wall outlet at the following
times, otherwise the machine may operate if the
start switch is pressed by mistake, which could
result in injury.
When carrying out inspection, adjustment and
maintenance
When replacing consumable parts such as the
loopers and knife
Disconnect the air hoses from the air supply and
wait for the needle on the pressure gauge to drop
to “0” before carrying out inspection, adjustment
and repair of any parts which use the pneumatic
equipment.
If the power switch and air need to be left on when
carrying out some adjustment, be extremely
careful to observe all safety precautions.
Use only the proper replacement parts as
specified by Brother.
If any safety devices have been removed, be
absolutely sure to re-install them to their original
positions and check that they operate correctly
before using the machine.
Any problems in machine operation which result
from unauthorized modifications to the machine
will not be covered by the warranty.
