Filter
Top Products
1
2
3 3
5
6
8
9
11
12
4
7 10
DISPLAY PANEL
1. TIMER - Press the TIMER button once
for 1 hour of operation; press the button
a second time for 4 hours; press a third
time for 8 hours. Pressing the TIMER
button a fourth time returns to the Off
Timer mode.
2. FUNCTION - Press the FUNCTION
button once to set the unit to Auto.
Continue to press the button for Sleep
> Low > Medium > High > Return
to Auto.
3. DUST & ODOR SENSORS -
Automatically monitor air quality and
adjust fan speed.
4. CHANGE FILTER INDICATOR - The
indicator will signal when to replace the
lter cassette.
5. AUTO MODE - The unit is set to
default to Automatic operation when
it is rst turned on. Smart sensors will
automatically sense the amount of
impurities in the air, and adjust the fan
speed accordingly.
6. PLASMAWAVE
TM
INDICATOR - Turn
on the Plasma generator by pressing
the PLASMA ON/OFF button on the
remote. PlasmaWave
TM
generates both
positive and negative ions to produce
hydroxyl radicals that inactivate airborn
contaminants.
7. LIGHT SENSOR - Automatically
activates Sleep mode when room
is darkened.
8. FAN SPEED INDICATOR - Shows
current fan speed setting.
9. SLEEP - The unit will work on Ultra-
Quiet mode and dim the control
panel lights.
10. AUTO SLEEP MODE - Use the TIMER
button on the display or remote to
manually turn the light sensor on or
off. With the light sensor on, the unit
will automatically operate in Sleep
mode when the room is dark. When the
room is light, the unit will revert to its
previous settings. Sleep mode provides
the lowest, quietest fan setting and a
dimmed display panel.
11. TIMER - Indicates timer setting or
continuous mode.
12. POWER BUTTON - Turn unit on
and off by pressing the POWER
button. Holding the button down
for 2-3 seconds turns the Plasma
generator on or off.
6 7