Winix WAC-9000 Air Cleaner User Manual


 
4. Place the new lter cassette in the
main unit.
5. Replace the front panel after pressing
CHANGE FILTER reset button.
6. Plug in the power cord to a wall outlet
and turn on the unit.
Filter Cleaning
We recommend cleaning the Washable
Anti-Bacterial Pre-Filter and the Washable
Nano-Silver Mesh/Carbon Filter every
three months with normal use. The interval
between cleanings will vary based on room
conditions.
1. Remove the front panel and lter
cassette as described in Replacement
Procedure.
2. Remove the Pre-Filter by gently pulling
one side of the cassette frame outward
while lifting the Pre-Filter tab at the same
time. When one edge is
clear of the frame, the
Pre-Filter will slide
out for cleaning.
3. Lightly vacuum the Pre-Filter and wash
with water and a mild household deter-
gent. Rinse, and shake off excess water.
4. To remove the Washable Nano-Silver
Mesh/Carbon Filter, turn the cassette
over and place face-down on an even
surface. Slightly ex the cassette frame
outward while pulling up on the long
tab. When the rst corner is released,
pull out on the other long frame tab while
continuing to pull out on the lter tab.
When one long
edge of the lter
is free, slide out
for cleaning.
12 13