Filter
Top Products
OPERATIONS-OPERATING THE MACHINE
86302100 CLIPPER DUO 10/02/07
3-9
STEP 1
STEP 4
STEP 2
1 ft.
(30 cm)
STEP 3
1 in.
(25mm)
1
2
1. This machine can be operated in either
direction. For smaller areas operate the machine
by pulling rearward.
2. For larger unobstructed areas, flip the handle
and use the machine’s brush assisted propelling
motion.
Start at wall closest to power outlet. For small areas,
pull straight back without pushing down on handle.
Release intermittent trigger switches or turn off
continuous setting on solution switch approximately
1 foot before ending cleaning pass.
Push down on handle to raise vacuum shoe and
brush before moving to the next cleaning pass.
Overlap brush contact area approximately 1 inch.