Filter
Top Products
OPERATIONS
86302100 CLIPPER DUO 05/08/08
3-3
HOW THIS MACHINE WORKS
This carpet extractor is an electrical powered,
portable carpet extractor intended for commercial
use. The appliance sprays a cleaning solution onto
the carpet agitates the wet carpet, and then extracts
the soiled solution back into the unit’s recovery tank.
The appliance is fitted with and a hand tool for
cleaning upholstery and stairs.
The machine is designed to maintain your carpet
using the Encapsulating Interim Carpet Cleaning
Process. By using the Interim Carpet Maintainer in
conjunction with Windsor Red Carpet Encapsulating
Interim Cleaning (W450-4) or Encapsulating Interim
Cleaning with Carpet Protection (W455-4) chemical
solution, you can perform a regular light cleaning
and grooming of your carpet very quickly, and have
the carpet dry and ready for traffic within 30 minutes.
The machine is also designed to restore your carpet
using carpet extraction chemicals. The machine is
designed to apply cleaning solution onto carpeted
floor, scrub the carpet with two counter-rotating
brushes, and then vacuum the soiled water back into
the recovery tank.
The machine's primary systems are the solution
system, scrub system, recovery system and operator
control system.
The function of the solution system is to store mixed
solution and deliver solution to the appropriate spray
jet. The solution system consists of the solution
tank, strainer, extraction pump and interim pump,
solenoid valve, spray jets, accessory hand tool, and
controls. The solution tank stores solution until it is
delivered through the strainer to the appropriate
pump. The solenoid valve allows flow from the
extraction pump to the extraction nozzle or stops
flow at the extraction nozzle so that the accessory
hand tool can be used. The interim pump provides
flow directly to the interim nozzle. The strainer
protects the pump from debris. The solution pumps
control the cleaning solution flow.
The function of the scrub system is to scrub the
carpet, mix the cleaning solution with the soil and lift
and groom the carpet pile. The scrub system
consists of two cylindrical brushes, motor, and
controls. The brushes scrub the carpet as the motor
drives the brushes. The counter-rotating action of
the brushes grooms the carpet pile.
The function of the recovery system is to vacuum the
soiled water back into the recovery tank. The
recovery system consists of the vacuum shoe,
vacuum motor, float ball filter, recovery tank and
controls. The vacuum shoe extracts the dirty
solution from the carpet as the machine moves
forward. The vacuum motor provides suction to
draw the dirty solution off the floor and into the
recovery tank. The float ball filter protects the
vacuum fan from debris and foam. The recovery
tank stores the dirty solution.
The function of the operator control system is to
allow the operator to select the desired function to
perform.
CAUTION: This appliance is not suitable for picking
up hazardous dust.