Filter
Top Products
7
INSTALLATION
Fig. 4
When you use this air conditioner unit, hot air must be exhausted out of the room to complete the air exchange of the condenser.
When the unit is operating in fan-only mode, no exhaust is required.
Exhaust hose Installation
The exhaust hose must be installed onto the unit.
1. Pull out about 6” of one end of the exhaust hose.
2. Screw the exhaust connector on the exhaust hose in a clockwise motion.
3. Snap the exhaust connector in place in the back of the unit.
4. Only extend the exhaust hose to the necessary length.