Whynter ARC-13W/S Air Conditioner User Manual


 
24
MAINTENANCE
CLEANING THE AIR FILTER
To ensure the air intake is filtered properly and to assure that your air conditioner runs efficiently, it is crucial to clean the air filters
regularly.
When the air conditioner has been in use for a certain amount of time, the green LED (3) on the control panel (Fig. 5) will start to
flash indicating that it is time to clean the air filters.
Press the stand-by button to switch off the air conditioner. Remove the air filters housed in the air intake grilles on each side.
Press the grips to release the air grilles and pull the filters frames up to remove from the frame (Fig. 22 & 23).
Use a vacuum cleaner or tap lightly to remove loose dust and dirt from the filters. Then rinse them thoroughly under warm or
cold running water (no hotter than 100F.)
Dry thoroughly before re-inserting the filters.
WARNING! Never operate the air conditioner without the filters in place.
Fi
g
. 22 Fi
g
. 23