Filter
Top Products
18 19
You can change the day, time period or temperature settings of the
pre-programmed schedule.
1. Set the SYSTEM switch to COOL (to program the cooling schedule),
or to HEAT (to program the heating schedule).
2. Press the PRGM button. The start time and temperature of the fi rst
weekday (Monday through Friday) time period (Morning)
is displayed.
– Use the
buttons to set the temperature for that time period.
– Press the TIME button to modify the start time of that time period.
Use the
buttons to adjust the start time in 15-minute
increments.
Part 4
Additional thermostat features
4.1 Customize the pre-programmed
schedule
3. Press the PRGM button. The start of the next weekday time
period (Day) is displayed. Program Day and then Evening and
Night time periods for weekdays as you programmed Morning.
– Press PRGM after each time period is programmed.
4. Once the weekday periods are set, repeat the programming steps to
program time periods for SA (Saturday) and then SU (Sunday).
5. When you are fi nished customizing the schedule, press RUN.
You can override a programmed temperature for a brief period of time.
1. Use the
buttons to raise or lower the desired temperature.
2. The override will automatically cancel after a period of time defi ned
in Setup Question 1 (see Table 3.3 of the manual).
3. Cancel the override by pressing the RUN button.
4.2 Set temporary hold at