Filter
Top Products
32
4. Press and hold
VIEW
PRGM
to view heating/cool-
ing periods and heating temperatures for
Tuesday.
5. Repeat steps 3 and 4 to review all remain-
ing days’ programming. If you find an error
in any day’s programming, go back to the
programming instructions to correct the er-
ror (you can change any part of your pro-
gram while you are reviewing it).
6. Press
RUN
PRGM
.
7. Press
SYSTEM
SWITCH
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
temperatures.
9. Press
RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press
SYSTEM
SWITCH
until OFF is displayed. Reat-
tach thermostat to subbase. Then press
SYSTEM
SWITCH
to select the operation mode you want
(HEAT, COOL, AUTO).
When you have completed programming, you
may set option switches #3 or #4. (see TOTAL
KEYPAD LOCKOUT and PARTIAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).
NOTE