Filter
Top Products
27
cooling period 1 and the currently pro-
grammed HEAT A or HEAT B temperature
for heating/cooling period 1.
EXAMPLE:
This display window shows that for
Monday’s heating/cooling period 1, the start
time is 5:00 AM, and 64° is the programmed
temperature (this example reflects factory
preprogramming, where 64° is the HEAT A
temperature).
3. To change the displayed start time to your
selected start time for Monday’s period 1,
press
TIME
FWD
or
TIME
BACK
until your selected time is
displayed. The time will change in 15 minute
increments. The time you program will be
the start time of Monday’s period 1 for
both heating and cooling.
4. If the temperature displayed is not the HEAT
A or HEAT B temperature you want for
Monday’s period 1, press or (if
you continue to press or , the
display will alternate between the HEAT A
and HEAT B temperatures you previously
selected).
5. If you want the fan to run continuously
during Monday heating/cooling period 1,
press
FAN
SWITCH
until PRG FAN is displayed.
6. After selecting the desired heating tem-
perature for heating/cooling Monday’s pe-
riod 1, press
VIEW
PRGM
. The currently pro-
grammed start time and heating tempera-
ture for Monday’s heating/cooling period 2
will be displayed.