Filter
Top Products
28
7. Repeat steps 3 through 5 to select the start
time and heating temperature for Monday’s
heating/cooling period 2.
8. Repeat steps 3 through 7 for Monday’s
heating/cooling periods 3 and 4.
The thermostat has a built-in COPY feature.
This feature automatically copies the heating
and cooling programs you select for Monday
into Tuesday through Sunday’s programs. If
you want to have the same programming every
day, after you program Monday’s schedule,
you simply press
RUN
PRGM
to start the thermostat’s
programmed operation. Every day will then use
the same program you set for Monday. You
may also choose to use the
HOLD
COPY
button to copy
any day’s heating and cooling program into any
other day’s program (see USING THE COPY
BUTTON).
9. To enter Tuesday’s through Sunday’s heat-
ing programs, use the
HOLD
COPY
button described
below, or press
ADV
DAY
until the correct day’s
abbreviation is shown in the display. Re-
peat the above steps to program each day’s
heating/cooling periods and heating tem-
peratures.
10. When you have completed programming
your heating/cooling periods and heating
temperatures, press
RUN
PRGM
to begin program
operation.
NOTE