Filter
Top Products
32
4. Press and hold
VIEW
PRGM
to view heating/cooling
periods and heating temperatures for Tues-
day.
5. Repeat steps 3 and 4 to review all remain-
ing days’ programming. If you find an error
in any day’s programming, go back to the
programming instructions to correct the error.
6. Press
RUN
PRGM
.
7. Press
SYSTEM
SWITCH
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
temperatures.
9. Press
RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press
SYSTEM
SWITCH
until OFF is displayed. Reattach
thermostat to subbase. Then press
SYSTEM
SWITCH
to
select the operation mode you want (HEAT,
COOL, AUTO).
When you have completed programming, you
may set option switch #3 (see TOTAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).
NOTE