24
5. Press
SET
DAY
once. The display will show the
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the current day of the week.
7. Press
RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Enter Heating Program
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume
programming after this happens, press
VIEW
PRGM
until you are at the point where you stopped
programming. Then you may continue to enter
your programs normally. If you want to stop
programming at any time, simply press
RUN
PRGM
to
resume program operation.
1. Press
SYSTEM
SWITCH
until HEAT is displayed.
2. Press
VIEW
PRGM
once. 5 DAY (indicating week-
day program), and MOR, representing
the morning heating period, will appear
in the display. Also displayed are the
currently programmed start time for the
MOR period and the currently programmed
temperature.
EXAMPLE:
5 DAY