White Rodgers 1F87-0261 Thermostat User Manual


  Open as PDF
of 12
 
8
4. PressTIMEonce(theprogrammedtimewillash).Press
or until your selected time appears. The time will
changein15minuteincrements.Whenyourselectedtime
is displayed, press TIME again to return to the change
temperature mode.
5. PressPRGMonce.Thecurrentlyprogrammedstarttime
and setpoint temperature for the 2nd heating program
period will appear.
6. Repeatsteps3and4toselectthestarttimeandheating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods.
8. Press PRGM once. “TU” (indicating Tuesday program)
will appear in the display, along with the start time for
the 1st heating period and the currently programmed
temperature.
9. Repeatsteps3through8tocompleteheatingprogramming
for all periods each day.
10.Whenyouhavecompletedenteringyourheatingprogram,
pressRUN/HOLD.
Enter Cooling Program
1. MoveSYSTEMswitchtoCOOL position.
2. Follow Enter Heating Program for entering your
cooling program, using your selected cooling times and
temperatures.
PROGRAMMING
If the outside temperature is below 50
o
F, disconnect
power to the cooling system before programming.
Energizing the air conditioner compressor during
cold weather may cause personal injury or property
damage.
CAUTION
!
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one
final time before beginning thermostat operation.
1. MoveSYSTEMswitchtoHEAT position.
2. Press PRGM to view the 1st heating period time and
temperatureforMonday.EachtimeyoupressPRGM,the
next heating period time and temperature will be displayed
insequenceforeachday,(youmaychangeanytimeor
temperatureduringthisprocedure).
3. PressRUN/HOLD.
4. MoveSYSTEMswitchtoCOOL position.
5. Repeatstep2tocheckcoolingprogram.
6. MoveSYSTEMswitchtoHEAT or COOLandpressRUN/
HOLDtobeginprogramoperation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO
PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
 previous next