Filter
Top Products
Oiling the fan motor
El&trlcal Shock Hazard
Unplug power cord from receptacle before
oiling the fan motor. Failure to do so could
result in electrical shock.
1.
Unplug power cord.
2. Remove unit from cabinet. (Follow steps under
“Annual maintenance” on page 6.)
3. Oil the fan motor per instructions on the motor.
To add oil, remove the oil hole plug at each
end of the motor. Oil with SAE #20 non-
detergent oil.
4. Replace the plugs to keep dirt from motor
bearings.
5. Replace unit in cabinet.
6. Reconnect power supply.
Energy saving tips
. Improve home insulation. Seal doors, windows,
and close fireplace flue.
l
Close blinds or drapes on sunny side of house.
Add window awnings.
l
Keep air filter clean. Don’t block airflow with
drapes or furniture.
l
Ventilate attic (high temperature levels add to
normal cooling load).
l
Try not to use heat producing appliances during
the hottest part of the day. Turn lights, radios,
televisions and other appliances off when not
needed.
l
Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
l
Use a vent fan in cooking, laundry or bathing
areas to pull out heat and moisture near its
source.
7