Filter
Top Products
Operating Instructions
Starting your air conditioner
Exhaust vent
cwtrd -
Thermostat
amtrd -
Electrlcal Shock Hazard
l Plug unit only Into grounded electrlcal
outlet.
l Do not use an extenslon cord.
l Do not operate unlt with front removed.
Failure to follow the above precautions
could resuit In elect&al shock or personal
Injury.
1. Set Exhaust Vent Control
to
CLOSED
for
maximum cooling.
2. Set System Control
to the desired setting.
LO COOL
. . . . . . . . . . . . . . . . . . . . . . . . . for
sleeping comfort
HI COOL
. . . . . . . . . . . . . . . . . . . . . . . . . for
maximum cooling
FAN ONLY
. . . . . . . . . . . . . . . . . . . for circulating
room air
when no cooling is desired
3. Turn the Thermostat Control
to number 6
(mid-setting). You can adjust the air condi-
tioner’s cooling performance by resetting the
Thermostat Control to a higher number for
maximum cooling. Lower the number setting
for less cooling. You will need to experiment to
find the setting which suits you best.
NOTE:
If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, waft at least three minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.
Using the HEAT settings
Turn the Thermostat Control
to number 6 (mid-
setting). You can adjust the air conditioner’s
heating performance by resetting the Thermostat
Control to a lower number for more heat. Turn to
a higher number for less heat.
LO HEAT-for reduced air movement with heat
HI
HEAT-for maximum air movement with heat
NOTE: This product is not designed to be used
as a primary heat source. lt is intended for
supplemental heating only.
3