Whirlpool ACE184XM0 Air Conditioner User Manual


 
Annual Maintenance for Your
Air Conditioner
Your air conditioner needs annual maintenance to
help insure steady, top performance throughout
the year.
Call the service company recommended by your
dealer to:
l
Inspect and clean the coils and condensate
water passages.
l
Check fan and oil the fan motor.
l
The compressor is sealed and needs no oiling.
Expense of annual inspection is customer’s
responsibility.
- or -
If you are familiar with electrical appliances,
you can do the cleaning and maintenance
yourself. If you decide to go ahead, follow
these steps:
1
l
REMOVE UNIT FROM CABINET. Wrap the
motor, electrical control box and electrical
terminals box in plastic film and make sure no
water or other liquid gets inside any of these
parts. It could damage the insulation and
cause serious trouble.
2
l
Carefully clean and hose out the base, coils
and condensate pans. Clean at least once a
year or more often, if the condenser coils and
pans collect dirt, sand, leaves, insects or algae.
Also, clean if you detect an odor from the
air conditioner. While the cabinet is open,
this is a good time to oil the fan motor.
3
l
Remove plastic film from motor and electrical
parts.
4
l
Replace unit in cabinet.
NOTE: It’s a good idea to wait 24 hours
before starting the unit again. This allows
time for all areas to dry out. The water from
rainfall or from normal operation does not
harm these components.
Oiling of the Fan Motor
1
l
Oil the fan motor per instructions on the
motor. To add oil, pull out the oil hole plug
at each end of the motor (See Figure 16).
Figure 16
OIL PLUGS
An easy to use oneOunce capsule of especially
recommended oil (Part No. 10943) can be
ordered from your dealer, or use SAE #20 non-
detergent oil.
2
l
Replace the plug to keep dirt from motor
bearings.
3
l
Reinstall unit in cabinet after performing
maintenance.
13