Filter
Top Products
Using the Exhaust Control
(on some models)
The Exhaust Control setting draws stale or
smoky air from the room.
1
. To exhaust room air
Set exhaust control to OPEN. Adjust fan
control to speed desired. If no cooling is
desired, use FAN ONLY setting.
2
. To circulate room air
Set exhaust control to CLOSED. Adjust fan
control to FAN ONLY.
FRESH AIR
FAN ONLY
Changing Air Direction
The louvers in the grille area at the top of the air
conditioner control the direction of the cooled air.
1
l
Move the tabs at the bottom of the grille to
the right, left or straight ahead. Simply move
the tabs in the direction you want the air to
go (see Figure 13).
2
. On most models, the louvers can only be
adjusted left or right. The front set is fixed
and directed upward.
3
. On some models, air flow can be directed up
or down. Move the tab in the center louver to
direct air.
Figure 13
11