Filter
Top Products
HOW TO START AND USE
YOUR AIR CONDITIONER
EXHAUST CONTROL
FAN SPEED/
HEAT CONTROL
THERMOSTAT CONTROL
CLOSED
CID
-*
Be sure air conditioner is OFF before plugging
it in.
To Start Your Air Conditioner
1
l
Set exhaust control (if your unit is so equipped)
to OFF for maximum cooling or heating results.
2
l
Choose a fan speed setting for cooling or heating.
LO COOL. . . . . . . for sleeoina comfort.
HI COOL . . . . for maximum cooling.
LO HEATfor reduced air movement with heat.
HI HEATfor maximum air movement with heat.
3
l
Turn thermostat control to Number 6 (mid-setting).
You can adjust the air conditioner’s performance
by resetting the thermostat control to a higher
number for maximum cooling. Lower the number
setting for maximum heating. You will need to
experiment to find the settings which suit you best.
When lowering the thermostat control setting, the
compressor (motor) may shut off. When the
compressor is turned off with either the fan speed
control or the thermostat control, wait 2-3 minutes
before restarting the air conditioner or, turning the
compressor back on.
10