Filter
Top Products
HOW TO START AND USE
YOUR AIR CONDITIONER
EXHAUST
CONTROL
FAN SPEED
CONTROL
THERMOSTAT
CONTROL
FAN
SPEED/
HEAT
CONTROL
For Exhaust Control
The Exhaust Control setting draws stale or
smoky air from the room.
1
l
To exhaust room air
Set exhaust control to OPEN. Adjust fan
control to speed desired. If no cooling is
desired, use FAN ONLY setting.
Be sure air conditioner is OFF before plugging it in.
NOTE: Exhaust Control not available on Models
ACE664 and ACW664.
To Start Your Air Conditioner
1
l
Set exhaust control to OFF for maximum
cooling or heating.
2
l
Choose a fan speed setting for cooling or
heating.
LO COOL . . . . . . . . . for sleeping comfort
HI COOL . . . . . . . .
for maximum cooling
LO HEAT.. . . . for reduced air movement
with heat
HI HEAT . . . for maximum air movement
with heat
3
l
Turn thermostat control to Number 6 (mid-
setting). You can adjust the air conditioner’s per-
formance by resetting the thermostat control to
a higher number for maximum cooling. Lower the
number setting for less cooling. You will need to
experiment to find the setting which suits you
best.
OPEN
FAN ONLY
2
. To circulate room air
Set exhaust control to CLOSED. Adjust fan
control to FAN ON LY.
CLOSED
FAN ONLY
Changing Air Direction
The louvers in the grille area at the top of the air
conditioner control the direction of the cooled air.
Move the tabs at the bottom of the grille to the
right, left or straight ahead. Simply move the levers
in the direction you want the air to go (see
Figure 8).
8