Filter
Top Products
INSTALLATION INSTRUCTIONS
for Your Air Conditioner
Through-the-wall
Installation Instructions
1
l
Unpack accessory parts
shipped with cabinet
(see Figure 3) before installing your air
conditioner.
2
. Pick the right wall.
First, decide what room(s)
vou want to cool. Then choose a wall that
will allow the air-conditioned air to flow
freely and directly into the room(s) you want
cooled. Remember, it’s difficult to move air
around corners. Choose a location that’s
also near an electrical outlet. (Refer to the
ELECTRICAL REQUIREMENT pages for
type of receptacle and wiring needed.)
Do
not use an extension cord.
CAUTION: DO
NOT LOCATE AIR CONDITIONER WHERE
PLASTIC CABINET FRONT WILL BE
EXPOSED TO A HEAT SOURCE THAT
RAISES THE SURFACE TEMPERATURE
IN EXCESS OF 120°F.)
CAUTION:
l
Be sure air conditioner does not fall out of
window during installation.
l
Handle the air conditioner with care.
Watch out for the sharp metal fins on
the front and rear coils.
l
Do not use the collected water for drinking
purposes. It is not sanitary.
3
. Remove hardboard panel
by removing the
two screws holding hardboard panel to front
of cabinet (see Figure 4). Release panel by in-
serting finger in service-cord opening on left
side of cabinet and pushing outward.
Install
cabinet using installation
instructions on
hardboard panel.
6