Filter
Top Products
Using the exhaust vent control
The Exhaust Vent Control draws stale or
smoky air from the mom or circulates
existing room air.
To exhaust room alr:
1.
Set Exhaust Vent Control to OPEN.
2. Set Selector Control to desired setting
(COOL, HEAT, or FAN ONLY).
3. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN).
4. Set Thermostat Control to desired setting.
To circulate room air:
1.
Set Exhaust Vent Control to CLOSED.
2. Set Selector Control to desired setting
(COOL, HEAT, or FAN ONLY).
3. Set Fan Control to desired setting
(ENERGY SAVER or NORMAL FAN).
4. Set Thermostat Control to desired setting.
NOTE:
For maximum performance, the
Exhaust Vent Control must be in the
CLOSED position when cooling or room air
circulation is desired.
Changing air directiol
The air direction cartridges on both sides of
the unit control the direction of the cooled
air. The air direction cartridge rotates to
direct the air straight ahead or to the sides of
the unit. The louvers in each air direction
cartridge are operated by a tab. Use the tab
to direct the air up, down, or straight ahead.
6