Filter
Top Products
Do not use rubbing alchol or flammable toxic
solvents, such as acetone, gasoline carbon
tetrachloride, etc. These can damage the
material. Do not use a sharp instrument or any
harsh or abrasive cleaners.
Energy Saving Tips
l
Improve home insulation (seal doors, wrndows.
and close fireplace flue).
l
Close blrnds or drapes on sunny side of house.
Add wrndow awnrngs.
Keep air filter clean. Don’t block air flow with
drapes or furnrture.
Ventilate attrc (high temperature levels add to
normal cooling load).
Try not to use heat producing applrances during
the hottest part of the day. Turn lights, radios,
televrsions, and other applrances off when not
needed.
Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
Use a vent fan in areas In cooking, laundry or
bathing areas to pull out extra heat and moisture
near its source.
HOW TO START AND USE
YOUR AIR CONDITIONER
To start Your Air Conditioner
1.
Set the
FRESH AIR/EXHAUST CONTROL
to OFF
for maximum cooling.
2.
Set the
FAN SPEED CONTROL
to the desired
setting.
QUIET
COOL.
for sleeping comfort
REGULAR COOL
.for normal cooling
MAX COOL
.for maximum cooling
FAN ONLY
.for air circulation only
FAN SPEED
CONTROL
ENERGYSAVER
CONTROL
THERMOSTAT
3. Turn
THERMOSTAT CONTROL
to the mid (Number
6) setting. You can adjust the air conditioner’s
cooling performance by resetting the thermostat
control to a higher number for maximum cooling.
You will need to experiment to find the setting which
suits you best.
When lowenng the thermostat control setting, the
compressor (motor) may shut off. When the
compressor is turned off with either the fan speed
control or the thermostat control, wait 2-3 minutes
before restarting the air conditioner or turning the
compressor back on.