Filter
Top Products
6
Power Cord Storage
The Power Cord stores easily on the side of
the Vacuum Cleaner.
1. Position the Upper Cord Hook so it points up.
(See Figure 6a.)
2. Wind the Cord first around the Upper Hook
and, then, around the Lower Hook.
3. Continue to wind until the cord is completely
coiled.
4. Secure the plug to the cord
so it doesn't unravel. The
rubber grip built onto the
plug will fit around the cord
and keep it in place. (See
Figure 6b.)
Figure 6a
Transporting Your Vacuum Cleaner
Use the convenient, easy-to-grip Carry Handle to
transport your Vacuum Cleaner up and down the
stairs.
1. Return the Westinghouse WST1500 Vacuum
Cleaner to its upright position.
2. Locate the Carry Handle on the top of the
Vacuum Cleaner. (See Figure 7.)
3. Secure your hand firmly under the
Carry Handle.
4. Lift the Vacuum Cleaner up or down stairs.
Tools and Tips
Always use the Upper Handle or Carry Handle to
pull your Vacuum Cleaner from room to room.
Never pull your Vacuum Cleaner by the Hose.
Doing so may damage the Vacuum Cleaner Hose.
Figure 6b
Figure 7
Carry
Handle
WST1500-1509_IB_12-6-03 6/12/03 9:17 PM Page 7