Filter
Top Products
Part number 550-141-812/0699 7
GOLD GV SerGOLD GV Ser
GOLD GV SerGOLD GV Ser
GOLD GV Ser
. 3 — . 3 —
. 3 — . 3 —
. 3 —
UserUser
UserUser
User
’s’s
’s’s
’s
information manual information manual
information manual information manual
information manual
Check boiler interior piping
1. Remove boiler jacket top.
2. Visually inspect for leaks around internal piping, circulators, relief valve and other fittings.
Immediately call a qualified service technician to repair any leaks.
Have leaks fixed at once by a qualifed service technician. Continual fresh
makeup water will reduce boiler life. Minerals can build up in sections, reducing
heat transfer, overheating cast iron, and causing section failure.
Do not use petroleum-based cleaning or sealing compounds in boiler system.
Severe damage to boiler and system components can occur, resulting in
possible severe personal injury, death or substantial property damage.
— MONTHLY —
User maintenance procedures (cont.)
Check venting system
1. Visually inspect the flue gas vent piping for any signs of blockage, leakage or joints or
deterioration of the piping. Notify your qualified service technician at once if you find any
problem.
Failure to inspect the vent system as noted above and have them repaired by
a qualifed service technician can result in vent system failure, causing severe
personal injury or death.
Check automatic air vents (if used)
1. See Figure 1.
2. Remove the cap from any automatic air vent in the system and check operation by depressing
valve B slightly with the tip of a screwdriver.
3. If the air vent valve appears to be working freely and not leaking, replace cap A, twisting all the
way on.
4. Loosen cap A one turn to allow vent to operate.
5. Have vent replaced if it does not operate correctly.
Figure 1 Automatic air vent
85036
A
B