Filter
Top Products
10
Problem Check Cure
Side Burner does not light.
Is gas supply off? Turn supply on.
Flame is low in HIGH position.
Is the fuel hose bent or kinked? Straighten gas line.
Push button ignition does not
work.
Does burner light with a match? If match lights burner, check
igniter (see below).
If problems cannot be corrected by using these methods, please contact the Customer
Service Representative in your region using the contact information sheet provided
with your manual.
Side Burner maintenance
ƽWARNING: All gas controls and supply valves
should be in the OFF position.
Make sure wire is connected between the igniter and
electrode. Adjust igniter electrode to burner. Gap should
be 1/8 to 3/16 inch from tip of electrode to burner. Spark
should be a white/blue color, not yellow.
1) Igniter Wire
2) Burner
3) 1/8 to 3/16 inch gap between electrode and burner
(3)
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter
SIDE BURNER TROUBLESHOOTING