Filter
Top Products
Fig. 35
5. Reverse procedure to install the replacement
window.
DOOR SWITCH
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove the
TOP FRONT COVER.
2. Disconnect the lead wires to the door switch.
3. Remove the switch.
Fig. 36
4. Reverse procedure to install the replacement
switch and check for proper adjustment as
outlined under DOOR SWITCH ADJUSTMENT.
HIGH LIMIT THERMOSTAT
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Take out racks from the oven.
2. Remove the high limit thermostat cover/mounting
plate from inside the oven cavity at the top.
Fig. 37
3. Disconnect lead wires from high limit thermostat
then remove high limit thermostat from cover/
mounting plate.
SG SERIES GAS CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
F45525 Rev. A (0315) Page 16 of 33