VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 19
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page
10�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 45�
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please
set the video and audio streaming parameters as listed below�
For more information, please refer to Audio and Video on page 52�
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3� As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554� For more information, please refer to RTSP Streaming on page 45�
4� Launch the player on the 3GPP-compatible mobile device (ex� Real Player)�
5� Type the following URL commands into the player�
rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming access name for
stream1 or stream2>�
For example:
rtsp://192.168.5.151:554/live.sdp