32
© 2013 Directed. All rights reserved.
32
continues running for the programmed runtime.
4. Exit the vehicle and Lock the system.
Note
For Pit Stop on manual transmission vehicles follow the di-
rections in the “Manual Transmission Start (MTS mode)” on
page 32 section with the door open.
Manual Transmission Start (MTS mode)
When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine and the
REMOTE START ERROR
text and tones play as
an alert.
1. With the engine running, press the foot brake then set the parking
brake and leave the engine running. For Pit Stop or Turbo Timer
mode (to leave the engine running after Locking) open the driver
door.
2. Release the foot brake. As long as the engine is running there is
no time limit to perform this step.
3. Within 20 seconds of foot brake release, press any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command from the Advanced Start menu
screen).
4. The parking lights flash 5 times to confirm MTS mode en-
able and the remote start activates the ignition outputs. The
REMOTE START ON
text and beeps play to confirm.
5. Turn Off and remove the key from the ignition switch, the engine
remains running.
6. Exit the vehicle, close all the doors and Lock the system.