Filter
Top Products
B. Surface Mount Chassis (AES-2000S)
The AES-2000S comes with a black powder painted steel surface mount chassis. A knockout is provided on the bot-
tom of the chassis as an alternate wire entrance. The four outer holes on the back of the chassis are for mounting the
box to the wall.
0.875" Diameter
Knockout
(3) Hinge Holes
Junction Box Holes
Chassis Mounting Holes
Front View of Steel Surface Mount Chassis
Single Gang Box Holes
12.26"
6.13"
4.5"
9.0"
4.83"
1.5"
1.5"
1.65"
3.0"
6.0"
3.0"
3.0"
(4) 0.26" Diameter
Typical
3.3"
9.66"
0.875" Diameter
Knockout
(2) 0.20" x 0.43"
Slots Typical
(4) 0.16" Diameter
T
y
pical
4.0"
4.0"
Set
Screw
Use Sealant
VIKING
©
Hudson, WI
LETTE
RS
NAMES
CALL/HANG-UP
VOLUME
TTY
Hinge
(3) Screws (included) for
mounting the AES-2000 to the
surface mount chassis.
Steel Surface Mount
Chassis (included)
AES-2000
EZ
TM
HELP
AUDIO
* Optional Braille
"Audio" label (included)
Step 1. To mount the unit to a wall, unlock the panel using the key provided and swing the front panel open.
Step 2. Use the single gang or junction box holes provided in the back of the enclosure for alignment.
Step 3. Fasten the enclosure securely to the wall using the (4) outer chassis mounting holes.
Important: If the enclosure is to be mounted outdoors, use an appropriate sealant between the enclosure and the wall.
* Note: To help steer visually impaired visitors to the location of the EZ™ HELP button, the optional Braille “Audio” label may be adhered
above the push button.
4.