Filter
Top Products
Step 1 Step 2 Step 3
Step 5
CHANGING YOUR FILTER
wICkING FILTER MAINTENANCE
Step 4
To change the filter:
Step 7 Step 8
Uses replacement
filter WF2.
Turn off and unplug
your humidifier.
Remove the water tank
and filter tray.
Remove filter tray from
unit. Discard old filter
and set filter tray aside.
Soak new filter in
cool water.
DO NOT wring filter. Insert new filter into filter
tray. Place filter tray back
in humidifier.
NOTE: For best fit and
performance remove filter
tray from the humidifier
and insert presoaked
new filter.
Replace the water tank.
Step 6
NOTE: It is recommended that all maintenance be done in the kitchen or bathroom on a water resistant surface.
Remove water tank from unit before moving.
The filter should be changed every 1-3 months depending on your water quality. Keep in mind, depending on your
water quality, mineral deposits can still clog or discolor the filter, affecting its life and that of the humidifier.
Wicking Filter performance will diminish depending on the mineral content of the water and the amount of airborne dust
in the environment.
IMPORTANT: CHECK WICKING FILTER REGULARLY. Any of the following conditions indicate that it is time to replace the
Wicking Filter.
• A buildup of impurities and minerals on the Wicking Filter (evidenced by discoloration of the Wicking Filter)
• An appreciable decrease in Humidifier output
• The top of the Wicking Filter is not moist to the touch
• The Wicking Filter has large holes or tears
The Wicking Filter should be replaced at least one or two times during the season, depending on usage, mineral content
of the water and the environment. We encourage you to only use a Kaz Model WF2 Replacement Wicking Filter. The use
of other Wicking Filters may lead to substandard performance.
6