Filter
Top Products
24
7. Care and Maintenance — continued
7.9 Replacement Parts
A) Rear Wheels (two included)
If a rear wheel on the Sanitizing Power Head of your
CleanWave should become cracked or come off, simply
push a replacement wheel onto the axel until you hear a
snapping sound signifying it is securely in place.
B) Stand-up Locks (two included)
Your CleanWave is designed with rubber locks to allow the
wand to remain upright when desired. To remove a lock,
press your thumb on the base of the lock, push up and pull
out as the lock is removed from the slot. To replace the lock,
insert a spare rubber lock into the slot as shown (note the
orientation) and slide downward so as to seat in the bottom
of the slot.
7.9a
7.9b
Insertion of Stand-up Lock
Insertion of wheel onto axel of the
Sanitizing Power Head
Removal of Stand-up Lock
VH04-MAN-2012_Web.indd 24 12/12/12 3:37 PM