Filter
Top Products
7
ASSEMBLY INSTRUCTIONS cont.
3. Attach the lamp head gooseneck to the
shaft until the screw holes line up as
shown in Fig. 3. Use care when tucking
the wire into the shaft. Form a loop
with any excess wire prior to tucking it.
Insert the screw using the tightening
tool and turn clockwise to tighten.
4. Remove the light diffuser from
the protective plastic bag. Insert
the plastic pegs at the bottom
of the light diffuser into the
openings near the bulb
socket. Snap the tab
into place as shown
in Fig. 4.
Note: Be sure all
styrofoam packing
is removed from bulb
area prior to installing
light diffuser.
Close-up of screw hole in
the lamp head
Fig. 3
Fig. 4