Filter
Top Products
9
BULB REPLACEMENT
Fig. 5
Correctly seated bulb Incorrectly seated bulb
No Gap Notice
Large Gap
Removal
1. Unplug lamp from power source.
2. To access the bulb, remove grid diffuser
by depressing the tab and lifting it out.
(See Fig. 5 at right)
3. Firmly hold bulb base (B) and pull bulb
(C) from the socket (A) in an outward
motion. (See Fig. 6 below)
Installation
1. Unplug lamp from power source.
2. Firmly hold base (B) and push bulb (C)
into the socket (A).
3. Be sure bulb is fi rmly seated in the socket
(see Fig. 7 below) and snapped into the
metal bulb clip (D).
4. Replace grid diffuser.
Attention: Do not grip bulb by the
glass tubes. Only touch the base when
removing or inserting bulb.
Fig. 6
B
D
C
A
Fig. 7