A SERVICE OF

logo

Open as PDF
next previous
Figure 4
Figure 2
Figure 3
Hanging the ClearWave
®
Place the screw included into the wall
leaving approximately 3mm between the
screw head and the wall. Be sure to use
an the included anchor if mounting into
sheet rock or other soft material. Insert
the screw head into the hole located in
the upper part of unit. (Figure 2).
INSTRUCTIONS FOR USE
Standing the ClearWave
®
on a Table Top
Unfold the stand on back of lamp
(Figure 3) and place the ClearWave
®
on a stable, fl at surface.
Transporting the Unit
The ClearWave
®
is very light and easy to carry.
There is a convenient handle located on the
back (Figure 4).
6