Filter
Top Products
1
2 3
H
ose attachments
P
ut the cleaner in its upright
position. Turn the brush switch and
power switch to the off position.
R
emove the hose from its stored
position on the back of the cleaner.
Lift the hose attachment cover
located on the top of the dirty water
tank.
I
nsert the end of the hose into the
tool opening and twist clockwise
until it locks into place.
4
5 6
Attach the water supply connector
to the water supply port and press
firmly until it locks into place.
Move the floor/tools selector to the
tools (upward) position.
T
o wash upholstery
, be sure that
the brush switch is OFF and that
the power and soap switches are
turned ON.
Note: Do not allow upholstery to
become too wet.
16
17
V027_Rapide XL_aw 25/10/05 4:33 pm Page 8