Filter
Top Products
TOOLS
• Pencil
• Measuring Tape or 6 foot rule
• Tin Snips
• Drill and 1/8” dia. bit
• Gloves
• Screwdriver (Blade type)
• 5/16” Nut Driver or
5/16” Socket w/Ratchet
MATERIALS
• Chimney Connection- 6” Diameter Black Steel
pipe (24 gauge minimum) and elbow(s) either
adjustable
1
or corrugated as necessary
• 1/2” Sheet Metal Screws
• 6” Inside Diameter Underwriters Laboratories
(UL) listed Residential Type and Building Heating
Appliance Chimney, Type “HT”, or 6” existing
Masonry Chimney with ue liner.
• Floor Protector Material: 3’ x 4’-6” (as specied
on page 4.)
• Furnace Cement (Manufacturer recommends:
Rutland Code 78 or Equivalent)
1
Avoid adjustable elbows, they leak!
32 1/4
12 1/2
33 1/2
4 1/8
4 1/4
19 1/4
CENTER LINE OF 6"
CHIMNEY CONNECTOR
24
TOP OF FLOOR PROTECTOR
CENTER LINE
OF 6"
CHIMNEY
CONNECTOR
Save These Instructions! Read these rules and the instructions carefully.
1.
Check local codes. The installation must
comply with their rulings. Do not install this
heater in a mobile home or trailer.
2. Always connect this heater to a chimney or
vent to the outside. Never vent to another
room or inside a building.
3. Do not connect this heater to an aluminum
Type B gas vent. This is not
safe and is pro-
hibited by all codes. This heater requires
connection to approved
chimneys: Either a
chimney complying with the requirements
for Type HT chimneys in the Standard for
Chimneys. Factory Built, Residential Type
and Building Heating Appliance, UL 103, or
a code approved masonry chimney with a
ue liner
, preferably round. A larger
masonry
ue may be used, so long as the ue-section
diameter is not greater than 50 sq. in.
4. The chimney portion (whether factor-built
or masonry) must be tall enough to provide
sufcient draft and safe exit of smoke and
combustion products.
5. Be sure that your Chimney is safely con-
structed and in good repair. Have the
chimney inspected by the Fire Department
or a qualied inspector (such as a Chimney
sweep). Your insurance company may be
able to recommend a qualied inspector.
6. Inspect chimney connector and chimney
twice monthly during the heating season for
any deposit of creosote or soot which must
be removed.
7. Provide air for combustion from outside the
house into the room where the heater is lo-
cated. If the intake is not in the same room,
air must have free access to the room.
Name___________________________________________________Telephone #: (_____) ___________
City ________________________________________________State__________Zip ___________________
Email Address ___________________________________________________________________________
Model # of Unit ________________________________Serial # __________________________________
Fuel Type: qWood qCoal
Place of Purchase (Retailer) ______________________________________________________________
City ________________________________________________State__________Zip ___________________
If internet purchase, please list website address ___________________________________________
Date of Purchase ________________________________________________________________________
I have read the owner’s manual that accompanies this unit and fully understand the:
Installation
q
Operation
q
and Maintenance
q
of my new appliance.
Print Name Signature Date
Please attach a copy of your purchase receipt.
Warranty not valid without a Proof of Purchase.
Warranty information must be received within 30 days of original purchase.
Detach this page from this manual, fold in half with this page to the inside and tape together.
Apply a stamp and mail to the address provided. You may use an envelope if you choose.
You may register online by going to www.usstove.com
All information submitted will be kept strictly condential. Information provided will not be sold for advertising
purposes. Contact information will be used solely for the purpose of product notications.
" CUT HERE " CUT HERE
2