Filter
Top Products
25
4) The Zone Menu is
shown at right.
5) The Zone Over-
view menu shows
a quick view of
each zone’s cur-
rent condition.
6) System and Zone
Names may be set
in the Zone Names
screen. The “Rename
System” and “Rename
Zone” buttons al-
low entering custom
names from a keypad.
The “Select Zone
Name” and “Select
System Name” buttons
allow selecting pre-
configured names from
a list.
7) In multi-system envi-
ronments, the main
screen display will
change to indicate the
presence of multiple
zones. (Notice the new
zone button—labeled
“Upstairs”—at right.)
The arrow buttons
on either side of this
displayed zone name
will allow viewing of
the other zone setting
screens one at a time.
Multi-System Environments (Continued)
3) In a multi-system
environment where
the systems are in
the same Group, the
“Zones” button will
appear in place of the
“System” button (see
picture at right).
Pressing the “Zones”
button opens the
Zone Menu.