Filter
Top Products
Page - 11
Pub. No. 22-5204-01
Features
Adjusting to
new setting
Auto Changeover
When the system mode is set to Auto, the control automatically switches between heating and
cooling modes to maintain the desired comfort level.
Appears when
equipment is
energized.
Setpoint Deadband
The number of degrees separating Heating and Cooling setpoints. The amount of separation
between mode setpoints is user defined between 2 and 10 degrees. When the control is set to
Auto, and the cooling setpoint is changed to a cooler setting, the heating setpoint also
changes to maintain the selected degrees separation.The same action occurs when the heat-
ing setpoint is changed to a warmer temperature.